FSR 壓力傳感油墨

特色產品 – 力敏電阻油墨 FR-2050HR 和 FR-2050LR 一段時間以來，使用墨水打印傳感器一直是一種行之有效的電子打印方法。力傳感電阻器用于電阻隨著施加到傳感器表面的力的增加而減小的設備。 gzyinbiaol 提供了一個雙組分力傳感墨水系統，當混合到所需的比例時，提供不同的初始阻力和靈敏度曲線，在使用階段保持穩定。 Tekra 是 FSR 墨水和相關材料組件的系統解決方案提供商。 導電 FR-2050HR 和 FR-2050LR 可與非導電 137 混合，以在 50 至 500,000 ohms/sq/25μm 范圍內調節電阻水平。目標力傳感應用廣泛，包括：醫療電子，汽車電子、消費電子、音樂電子、機器人傳感器等，商業和工業最終用途。 主要優點： 兩組分，可混合的 FSR 墨水系統 許可要求的初始用戶阻力水平 在整個使用階段保持所需的值 匹配高導電銀組件 完整的力敏墨水配置文件  ，以上如有需要請致電13922125860（微信同步）

FSR pressure sensing inks

Featured Product – Force Sensing Resistor InksFR-2050HR and FR-2050LR

Using inks to print sensors has been a proven method of electronics printing for some time. Force sensing resistors are used in devices that exhibit a decrease in resistance with an increase in force applied to the surface of the sensor.

gzyinbiaol offers a two component force sensing ink system that when blended to a desired ratio, offers different initial resistance and sensitivity profiles which remain stable during the use phase. Tekra is your system solutions provider for FSR inks and related material components.

Conductive FR-2050HR andFR-2050LR, are blendable with non-conductive 137 to adjust resistance levels in the range of 50 till 500,000 ohms/sq/25μm. Targeted force sensing applications are wide reaching from: medical, consumer electronics, musical, commercial, and industrial end uses.

Key Benefits:

Two component, blendable FSR ink system

Permits required initial user resistance level

Maintains desired values throughout use phase

Matching high conductive silver components

Complete force sensitive ink profile

Markets Served:

Medical

Consumer electronics

Musical instruments

Industrial

Commercial